Arcilla de espuma para modelar de espuma seca al aire – Arcilla suave para cosplay para añadir slime, arcilla de moldeo para esculpir con espuma

Excelente a mi niño le encanto le encanta hacer figuras de fomi

I would say this is my favorite air dry clay. I use it for so many different projects that have all lasted a long time. I made a lighter case that lasted about 2 years. i always rebuy. The final result is not super hard after it dries so you are able to squish your nail or other sharp objects into the dried clay. I used to do that a lot with my lighter case and it never stayed unless you wanted to add a hole. It adheres to itself while wet so you can add onto dry projects.

A little difficult to use as a first time foam molder lol but it turned out great for the halo for my Alice Angel cosplay. I let it sit 24 hours before I painted it, and it’s held its shape wonderfully! (Maybe wear gloves while manipulating the foam).

I’m giving a 3/5 because the white was already set when I opened it and I couldn’t return it. No ability to mold, but I could paint and cut it well.Black was great!Definitely a learning curve with how to use it. I’d recommend using a mold to make any detailed items. It’s spongy too so when you try to mold stuff, it will kind of expand into a less precise shape. That’s just the nature of this material though. When it’s dry, it paints, cuts/trims, and glues super well. I was surprised that the black took on the color so well. It’s unfortunate that the white was already set (I saw someone else saying that too) but the black was really fun.

This stuff is so cool! We used it on a science project to lay over a mountain we built. It’s very soft but dries sturdy. Super easy to mold. Once it’s dry it takes spray paint like a champ when other things melt. It’s not sticky but it sticks where you want it to. Like this stuff is good! But if you need it for a large project it would probably be better to get a larger bucket. We made due with the small on a fairly large mountain by spreading it thin. But would have been easier to do with a bigger size. It’s a decent value for the money. But I found some at Michael’s that was about half price haha. Thought about testing to see if it was exactly the same. Cause bucket and all matched just not the label. But I had no project to use it on. This worked perfectly for what I needed it on.

I love this stuff. When you eat to add an embossed look to warbla, this works great! You HAVE TO make sure it is air tight when not in use because it will harden and become unusable. Light weight and and doesn't feel super sticky. It's easy to use, and dries without cracking. If you use it on a cosplay that may get wet, be sure to seal it with a product like Plasti-dip

It does what it's supposed to do but product arrived quite moist and takes a while to dry especially for larger pieces. Wet foam doesn't hold it's shape well and can deform and flow. Best to flatten out desired sized chunks and allow to dry out for up to an hour before working. But it's still much better than arriving too dry and unworkable.

LOVE this stuff! A little goes a long way, so as small as this tub is, don't let it fool you! I used maybe half a tub to make this mask. All the black parts are EVA foam, the white parts are the sculpt foam. I recommend doing your projects in layers and letting them dry for 24-48 hours to really let the foam harden really well. If you want to add a layer of it, just wet with water and spread more over it. It can also be heat formed, sanded, or dremeled down.Only downside is that it dries a bit smaller than when it's wet, so when doing detail work, you may lose some details after it's dried. Expect to sand or dremel the details back in.After it dried I sprayed with Plastidip and spray painted, and then I used acrylic paint for details and sealed with a weather proof sealant. Dried …